Toolholding excellence made by REGO-FIX

Four systems - one brand

Four systems – one brand

Our brand unites four different product systems. Each system has different strengths to fit your machining needs. But, at the heart of each system lies our aim for toolholding excellence.

At a glance

more >
ER

REGO-FIX introduced the first ER collet chuck in 1972. With the DIN standardization twenty years later, the REGO-FIX ER collet became the industry standard.

The widest ER product range clamps all diameters from 0.2 mm – 36 mm.

Safe and accurate toolholding of all shank types and materials.

Outstanding flexibility for usewith all tool types.

more >
more >
powRgrip

The powRgrip System provides excellent runout, high vibration dampening as well as easy and secure handling for demanding high-speed milling and drilling.

Total system run out TIR ≤ 3 μm at 3xD.

Excellent vibration dampening.

Tool ready for use in less than 10 seconds.

more >
more >
micRun

Closing the gap between the powRgrip and the ER System, the micRun System convinces with a total system runout of ≤3 µm @ 3 x D.

Total system runout TIR ≤ 3 μm at 3 x D.

Designed for high-speed cutting.

Silent and low vibration due to grooveless clamping nut.

more >
more >
Measuring

Increase process reliability, set-up times and accuracy with our Measuring products.

more >

Compare our product lines

 

powRgrip System

For high-end machining with a total system total system runout TIR ≤ 3 μm at 3xD

micRun System

Total system runout TIR ≤ 3 μm at 3xD

ER System

Our ideal system for all standard machining requirements

Toolholders

powRgrip toolholders

micRun toolholders

ER toolholders

Taper accuracy

Taper accuracy AT3

Taper accuracy AT3

Taper accuracy AT3

Surface finish

Surface finish max. Ra 0.25

Polished surface forimproved performance

Surface finish max. Ra 0.25

Balancing

  

Balanced for high RPM

Factory balanced

Other

High transferable torque up to 1.100 Nm

    

Collets

powRgrip collets

micRun collets

ER collets

Clamping range

Clamping range from 0.2 up to 25.4 mm

Clamping range from 1.0 mm to 20.0 mm

Wide clamping range: from ER 8 up to ER 50 and for diameters from 0.2 mm up to 36 mm

Clamping capacity

Clamps all shafts with tolerance h6

Clamping capacity h11 and nominal diameter shafts

Clamping capacity 0.5 mm – 2.0 mm

Other

Highly durable coating ensures longevity

  

Runout TIR ≤ 10 μm at 3 x D for ER standard. Runout TIR ≤ 5 μm at 3 x D for ER-UP

Other

Vibration dampening for high RPM

    

Clamping nuts

 

micRun clamping nuts

ER clamping nuts

Locking system

  

Collet locking-system

Collet locking-system

Balancing

  

Balanced by design

Balanced by design

Other

  

Groove-less design for higher RPM

Hi-Q coating improves transferable torque and protects against corrosion

Tightening

  

Easy tightening and loosening of the nut with our freewheel wrench head

Easy tightening and loosening of the nut with our torque wrench TORCO-FIX
 

A holistic system approach

All parts are designed for exclusive fit to ensure toolholding excellence.

A holistic system approach

All parts are designed for exclusive fit to ensure toolholding excellence.

  

UniTec products

more >
uniTec

Our uniTec products cover a broad range of toolholding needs.

more >
© REGO-FIX AG 2024